在线咨询 切换到宽版
eetop公众号 创芯大讲堂 创芯人才网

 找回密码
 注册

手机号码,快捷登录

手机号码,快捷登录

搜帖子
楼主: lu582583

[资料] 封装设计规范进阶级

[复制链接]
发表于 2022-12-10 21:50:02 | 显示全部楼层
Thank you very much for sharing information.
发表于 2023-1-6 10:41:16 | 显示全部楼层
thanks for sharing~
发表于 2023-1-10 16:34:25 | 显示全部楼层
Thanks for sharing
发表于 2023-2-21 11:07:57 | 显示全部楼层
口福来了,料足汁浓,汤鲜味美,尝鲜
发表于 2023-2-21 16:00:34 | 显示全部楼层
多谢分型
发表于 2023-2-28 11:05:47 | 显示全部楼层
真是一绝,很是稀饭和有料,探究一下
发表于 2023-3-6 21:56:46 | 显示全部楼层
4.1.        All new designs or revised die designs with all metal mask changes must meet the criteria outlined in these Design Rules. If the design was done earlier than the date of the latest revision of this specification and has a history of reliable performance, a redesign can be done without complete conformance to the stress design rules. Reliability engineering will act as the arbiter on these matters. For all other redesigns, run a DRC on the existing design to verify compliance to the current design rules. The intention is to correct all violations during the redesign.
发表于 2023-3-8 13:36:27 | 显示全部楼层
谢谢楼主大佬分享
发表于 2023-4-16 08:17:15 | 显示全部楼层
谢谢
发表于 2023-6-20 10:42:37 | 显示全部楼层
深度专业,内容很全面,实战性强,琢磨一下
您需要登录后才可以回帖 登录 | 注册

本版积分规则

手机版| 小黑屋| 关于我们| 联系我们| 隐私声明| EETOP 创芯网
( 京ICP备:10050787号 京公网安备:11010502037710 )

GMT+8, 2025-6-10 22:12 , Processed in 0.065618 second(s), 3 queries , Gzip On, Redis On.

eetop公众号 创芯大讲堂 创芯人才网
快速回复 返回顶部 返回列表