Calibre LVS Error (Verilog netlisit-GDS Layout)

testic50

Hi, I import a gds2 layout from Innovus to virtuoso (the layout import properly and DRC is Clean). I want to run LVS on this layout with the Verilog netlist (saved in Innovus). I set the v2lvs command parameter carefully and include the StdCell CDL library. LVS run but the result is incorrect. the fill cap cell exists in layout but don't exist in Verilog netlist and exists som incorrect NET. I very try to fix the problem but I can not. please help me. thank you.

hdch121212

Query the fill cap cell is or not in the Verilog netlist

testic50

   

hdch121212 发表于 2019-10-21 13:03
Query the fill cap cell is or not in the Verilog netlist

thank you for your help... how could I resolve it?