（东南大学）PWM_PFM自动切换降压DC_DC转换器的分析与设计

cicixu · 发表于 2009-3-25 10:35:39

dingdingding

freeray · 发表于 2009-3-25 11:37:50

下来看看，先感谢

prof3 · 发表于 2009-3-26 07:59:29

原帖由 refugee 于 2008-1-2 18:21 发表

 登录/注册后可看大图

如图所示，改成虚线所示的结果就正确了

Refugee's modification is completely wrong. He does not understand the operation of this cicruit.

Acutally, if 改成虚线所示, the current sensor no longer monitors or detects Ids of Mp power transistor and of course fails. Originally schematic is correct although it is quite simple and not that much accurate. However, for PWM/PFM transition, the threshold varition +/-20% is acceptable. If used in Current Mode DC-DC, this circuit is not good enough.

soga · 发表于 2009-4-17 01:13:48

看看有没有用

apac · 发表于 2009-4-17 03:07:43

pwm 應該很難吧, 推推推

dcy5915 · 发表于 2009-4-22 12:40:23

顶一下

dcy5915 · 发表于 2009-4-22 12:44:08

看看再说

dove888 · 发表于 2009-8-19 22:09:07

h嘿下了

70ytterbium · 发表于 2009-8-21 23:28:41

顶一下

howareyouabc · 发表于 2009-8-22 18:10:26

现下一个有时间慢慢学习了

账号		自动登录	找回密码
密码			注册

（东南大学）PWM_PFM自动切换降压DC_DC转换器的分析与设计

顶一下

看看再说

浏览过的版块