run Calibre PERC 問題

wiwi111

我用MGC_HOME中share case run PERC 出现以下讯息是什么问题(不管试什么case 都出现)--------------------------------------------------------------------------------
-----                CALIBRE:ERC - INITIALIZATION MODULE                 -----
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------

Performing global initialization ...


Initializing LVS ...

//  Applying licensing policy...

Initializing REPORT ...

--- CALIBRE:ERC INITIALIZATION MODULE COMPLETED.  CPU TIME = 0  REAL TIME = 0  LVHEAP = 1/3/3  MALLOC = 31/31/31  ELAPSED TIME = 1

--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
-----          CALIBRE:ERC  -  EXECUTIVE MODULE                           -----
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------

LVS Netlist Compiler - Errors and Warnings
------------------------------------------

Error: Subcircuit "PERC__TOP_DUMMY" not found


ERROR: Layout could not be read.

刘兴国

请问解决了吗，我也遇到了layout could not be read的问题，报more than one subcircuit definition found for “CELL”

刘兴国

请问解决了吗?我也遇到了layout could not be read 的问题,报 more than one subcircuit definition found for "CELL NAME",please specify the number of pins. 不知道是什么原因.

2021gogogo

请问怎么run perc

462126897

宝贝，字面意思吧，我觉得ERROR: layout could not be read.在calibre就只有一种意思呀

shantushuiyan

网表里面cell被调用了，但是没有定义，一般是topcell写错了

tracy6969

   

shantushuiyan 发表于 2024-1-28 21:11
网表里面cell被调用了，但是没有定义，一般是topcell写错了

thanks